Chicken manure dryer Features:
Chicken manure dryer is a low-fuel-consumption and high efficiency of drying equipment.
It can be be used to dry the material with a moisture content below
85% to a final moisture content below 13%,. It is applicble in
animal farming, food brewing, sugar and pharmaceutical industries
dealing with high humidity waste, as well as a variety of chemical
raw materials, such as chicken manure,wine slot,furnace slag,
fructose slag,slag vinegar sauce,sugar beet residue,animals
slaughtered contents,coal slime, bentonite,etc. It is for resource
development and good environmental protection equipment.
The equipment uses downstream drying process, especially suitable
for fast drying the humidity materials which need to preserve
nutrition, for example, the drying of fresh chicken manure can
achieve the purposes of drying, sterilization, deodorant and
preservation of nutritional. The dryer is equipped with high-speed rotating drum of crushing devices,
which increases the contact area between material and drying
medium, the internal unique equipment design, makes materials
difficult to adhere to the drum wall panels and parade. The
complete machine has the effects of heat preservation, good sealing
performance, and the fact that the thermal efficiency considerably
higher than the general drum dryer.
The dryer structure is compact, easy to install and debug, and using small
floor area. Drum and crushing device use stepless speed regulating
devices, which can adapt to the different requirements of the
drying materials. The dryer can combine th use of different fuels (such as coal, heavy oil,
natural gas, etc.).
Facilities and work principle:
The complete sets of equipment mainly is composed of the crushing
drum dryer, burning furnace, feed spiral, output spiral, pipeline, dust
collector, airlock, air induced fan, electric control cabinet and
Humidity materials are conveyed from the feed screw directly into
the dryer drum, raised by the drum wall panels repeatedly, and scattered by
the crushing blow dispersion devices. Materials and the negative
high-temp media are combined sufficiently to complete heat and mass
transfer process. As the result of the drum wind angle and the
induced air, the feed materials move slowly, and discharged from
the spiral after drying, the exhaust gas handled by the dust
precipitator, venting to the atmosphere.