Rotary Drum Agglomerator / Granulator (also known as balling drums or rotary granulators) are very
versatile pieces of equipment that can process a wide array of
materials. The equipment is typically used for high capacity
applications and usually requires some type of recycle depending on
the product specifications. Drum Granulators are used when an
Agglomeration - Chemical Reaction Process is required.
Typical applications of a Rotary Drum include, but are not limited
to the following:
Agglomeration involving Chemical Reactions where the feed
component(s) consist of reactive liquids or gases. The liquid
and/or gas can be added into the bed of material to get a complete
reaction and contain or reduce any emissions that may be generated.
Many inorganic fertilizers are produced in this manner.
Conversion of fine Mineral Ores into easy to handle agglomerates or
balls for further processing. Iron ore, copper ore, and gold ore
are a few examples.
Granulation where the only feed or the majority of the feed is a
Liquid or Melt such as urea granulation.
Coating of finished products by spraying a liquid onto the bed of
Mixing drums that can mix multiple solids and/or liquids.
Specialty Applications like a combination Granulation-Cooling Drum.
TAIDA's custom designs can accommodate the addition of other equipment
and accessories such as pipe reactors, discharge trommel screens,
liners (rubber or metal), spray bars, and spargers. If you need to
control emissions or dusting, TAIDA's discharge breeching design
makes capturing these materials easy so you don't have to worry
about contamination of the surrounding area.
As the one of the key equipments in fertilizer industry, rotary
drum granulator is applicable to cold, heat, and guniting and
ammoniated granulation and big scale fertilizer production of high,
medium and low concentration. The cylinder body adopts special
stainless steel or rubber plate lining structure. It can remove
scar and peel burl automatically It has the advantages of high
intensity of granule, high production, erosion proof, abrasion
proof, low energy consumption, long service life, convenient
operation and maintenance etc.Remark: If the formulation, process
and raw material are different, it will affect the yield, grain
rate and the diameter of the grain.